If you wish to use FTP you can FTP to your mikrotik router with the admin userid and password and replace the file there under the ‘hotspot’ directory. Open a simple text editor like notepad and copy and paste the following to the editor:ĭrag and drop this login.html to your “hotspot” directory in the Winbox program.
Double click on the file and choose Backup. On the side menu go to Files, and find the login.html file under the ‘hotspot’ directory.
So for example if you want to install the second router in location 3, the NASID should be set to ‘globalhotspot_3_wds_1’.ġ0. You have to customize Mikrotik’s built-in login page. For the second routers you need to add ‘_wds_1’ to the NAS Id, for the third router ‘_wds_2’, etc. NOTE: In case you are installing multiple routers in the same location, you should use different NAS IDs. Default is ‘MikroTik’.Ĭhange this the following way: OPERATORUSERNAME_LOCATIONNUMBERĮxample: Operator Username is ‘globalhotspot’, Location ID: ‘2’, then NASID should be: ‘globalhotspot_2’ The NASID setting in the Mikrotik is located under System > Identity. (Don’t set your own timezone, because the router has to show the GMT time!)ĩ. You need to change the router’s NASID. You’ll find NTP servers there.īe sure to leave TimeZoneName: manual, and TimeZone: 00:00 in System > Clock. To find NTP servers, go to and select the location’s continent on the right side of the page. Address one by one (if your Mikrotik doesn’t allow netmask values (.0/24) you can skip the netmask value):Ĩ. You need to syncronize the router’s time with our server.Ĭlick on System > NTP Client. Then in the section IP > HotSpot > Walled Garden > IP List add the following IPs to Dst.
Hostone by one:įor Hotspot FREE SOCIAL locations: you must add ‘too!
In the section IP > HotSpot > Walled Garden, click on + sign and add the following domains to Dst. Click Radius and the + sign.Ĭlick Services > Hotspot, enter radius Address:, Secret: hotsys123ħ. We have to allow certain sites and servers for non authenticated users otherwise they can’t buy access. Click Radius and the + sign to add our radius server.Ĭlick Services > Hotspot, enter radius address:, Secret: hotsys123Ħ. You need to add the secondary radius server. Then click the login tab and de-select cookie, allow http pap and chap.ĥ. You need to define our radius server.
In the hotspot profiles (IP > HotSpot > Profiles) choose your hotspot profile and click the radius tab, check allow radius. If you change this IP, the LOGIN and LOGOUT links will not work on your splash page.ģ. The router should be placed in ap bridge mode.Ĭlick interface, double click wlan1, click Mode: and select ap bridgeĪnd make sure the frequency is set to 2.4 b/G.Ĥ. You need to add our radius server as authentication and accounting server. You can accept default values but choose none for certificate. In winbox click IP > DHCP Client and Add DHCP Client to port ether1Ģ. Let’s add the hotspot service to wlan Click IP > HotSpot and the hotspot Setup box, choose wlan1 as hotspot interface. You can get Winbox from Mikrotik’s website.ġ. First we need to define the first port for WAN connection so the router will connect to the internet via another router with DHCP.
Winbox is the graphical user interface for configuring the Mikrotik Router OS. You need to setup your Mikrotik router by using Winbox. If you see a message about “Default configuration” press Remove configuration.